Fast & Easy To Install Deck Light Kits.
Create A Gorgeous Ambience
In Your Outdoor Space By Adding Outdoor LED Lights.
Get That Real 'Resort Feel' At Home
In As Little As 1 hour
Build YOUR Own Kit....To Suit YOU
Step #1 -Select Your Number Of Lights
We will include the correct sized LED Transformer (Driver) for the number you select - 10W or 30W (Each light will have 1m of cable attached to it)
Step #2 -Select One Of Three RGB Controller Types You Would Like
Standard Infra-Red Remote & Controller - This model requires line of sight between the Remote Control and sensor on the Controller. If line of sight cannot be achieved due to you locating the Controller underneath the deck, then please select a different controller for ease of use.
Long-Range Radio Frequency - This model has a range of 30-40m and can be located behind walls and right under the deck and this remote will control the lights perfectly.
iPhone Controlled - This model is controlled by iPhone App that is free from the App Store. It has a similar range to the Radio Frequency and can be located under the deck if required.
Step #3 - Select If You Would Like Us To Include A Dusk-Till-Dawn Light Sensor - Optional (Photocell)
As the name suggests, it controls your lights on & off depending on the amount of light available, so good for those who are using these lights as a runway to your door, where you would prefer them to turn on automatically at night and turn off in the morning. Also good for those who use their lights for security.
Completely optional, so please select if you would like and we'll include in your order.
Step #4 - Select If You Require Additional 4-Pin Cabling - Optional
You have choices of 1m, 2m or 3m Lengths and you have the option of buying 10 of each. If you require more, you can select the cables you need from the 'ACCESSORIES' page on our site. Just add what you need to your cart before you Checkout.
These cables can be used to insert between the RGB Controller to the 1st Light location if you need more cable here - so you are happy to leave the RGB Controller where it is, but you wont make it to your intended 1st Light location. Also if the 1m between each light won't suffice - and you need more.
NOTE: If you do wish to insert cable between the LED Driver & the RGB Controller, thus moving your RGB Controller closer to where you need the 1st Light location, instead of the the other way around as outlined above, you can insert 2-Pin Cabling here - you can also find that on our 'ACCESSORIES' page on our site, in 1m, 2m & 3m Lengths.
~ There You Have It - A Kit That Is Tailored To YOU & YOUR Project ~
- Plug to end of LED Driver - 1.5m
- Plug to end of RGB Controller - 2m
- Plug to 1st Light Location - 2.5m
- Between each light - 1m
So, what's in the box...?
40mm RGB DIY Deck Lighting Kit (RGB = Colour Changing)
- [Your Number] of 40mm LED (RGB) Deck Light Heads
- 12v 8W or 30W LED Lights Driver (SAA Certified/Approved) - Depending on # of lights
- RGB Controller - Whichever You Select
- Remote Control
- Cabling (1m of cable between each light head)
- Installation Instructions
- Free lift to your door
- ...and a FREE Drill Bit!!!
- No Running Back Down To The Hardware Store!
- No Wasting Money!
- Enjoy Your Lights Immediately!
- Create A Unique Outdoor Experience, Like That You Find In Resorts, In Your Own Home!
- Drill the correct sized hole for your light kit you have - no chance of COSTLY errors!
- Be The Envy Of Your Friends With Ambience YOU Created In An Hour!
Here at Vivid, we just think that makes SENSE.
Model: B104C Maximum
No. Of Lights
20 Lights on the
8W Driver Supplied
Voltage: 230-240V AC Driver: Input - 230-240V AC
Output - 12V AC
Driver Watts: 8W Lights Watts 6 x 0.4W Ratings: Driver: IP67 Controller: IP67 Lights: IP67 Cabling: IP67 Remote: IP44 LED's 1pc SMD5050 Lumens: 40 lm per Light Beam Angle 120 degrees Lens Material PC Frosted Light Material PC/304 Stainless Steel Rim Top Width 39.5mm Body Width 30mm Depth 20mm Cut Out/Drill 32mm Cabling Type 4-Pin RGB Type
Outdoor LED Lighting =Efficient Lighting
You may know that Outdoor LED Lights can be an efficient lighting option for your home, but just how efficient?
Our Outdoor LED Lighting is 12v, meaning it is an extremely safe and efficient way to light your outdoors. With each Outdoor LED Light using as little as 0.3W, this means that each 6 light kit can use as little as 1.8W in total. When you compare that to a 60W Incandescent light bulb or even a 20W Compact Fluorescent Energy Saver Bulb you may have in your indoor lamp for example - you can see how little energy your Deck lighting will consume!
'IP67 Rating'....What does that mean??
The IP Rating (or Ingress Protection Rating) consists of the letters IP followed by two digits and an optional letter. As defined in international standard IEC 60529, it classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. The standard aims to provide users more detailed information than vague marketing terms such as waterproof.
The first number, in this case '6' represents the highest Dust Immersion rating, meaning it is completely sealed off to solid foreign objects like dirt/dust.
The second number represents its capacity to keep out water, under a certain situation. In this case '7', means that our lights are rated to not only withstand a jet of water from a pressure washer (handy when pressure washing the deck at the start of the deck season), but also can handle full immersion in water up to 1m.
Now when we say our lights are IP67, we mean the Lights, the LED Driver (Transformer) & The RGB Controller (the box that controls the colour changing) - Our Entire Kit is IP67 Rated!!!
Beware of some competitors products out there - they may say they are IP67, but that may relate to the lights only! The Driver and RGB Controller, must be kept out of reach of any strong jets of water and flooding conditions!!
Vivid Lighting & Living Only Sells Top Quality Products - Built For The Harsh Aussie Conditions!!!
'RGB Colour Changing'....What does that mean??
RGB is an acronym for 'Red Green Blue'. When we talk about LED Lights being RGB, this means that inside the light head there is an LED chip inside that can turn Red, Green and Blue. Some models actually have seperate LED's of each colour inside the head.
Let's cast our minds back to the High School science days to understand it.
If you remember Mr. Whats-His-Name up the front talking about 'Primary Colours'...? Well, this is what he was talking about.
When you mix Red, Green & Blue in different amounts, you can get all the colours of the rainbow - Yellows, Pinks, Purples, etc. Including if you mix the Primary Colours in exact same amounts, you get White!
Now, connected to these RGB lights is whats called an RGB Controller, which is basically a tiny computer that reads what you select on the remote control and arranges how much Red, Green & Blue to omit, in order to get the colour you have selected.
Our LED Deck & In-Ground Lights come complete with a remote - Select from 16 colours, including White!
Did We Mention YOU Can Do This YOURSELF....
DIY Instructions....and YES, we do mean DIY!
Please read how easy this DIY Kit is to install, just 8 simple steps!!!
Ensure you have an external weather proof power socket where you intend to install your lights. DO NOT run extension leads from inside, out to your lights. If you do not have any outdoor power source near where your lights are to placed, please have your local Electrician do this for you. Please DO NOT run an extension lead out to your lights, this is NOT safe as it is not a weather proof connection.
Layout your lights and measure where you will place them and ensure the holes will be drilled at the correct spacing. We find that 1m or less between each light creates a great effect.
Using the drill-bit included in the box, drill your holes.
Feed the cable-end of the lights into the holes and press the light head down into the hole to ensure they are all seated properly. There is no need to glue or silicone the lights in, thats what the spring is for. This spring will hold the lights tight in their new home!
Underneath the deck, connect the lights by first observing the two arrows on the plugs are aligned, then press the male plug and the female socket together and push in tight so the rubber weather seal is firmly seated. Screw together finger-tight.
Once all lights are connected together, connect the Driver and Controller to the lights, observing the diagram in the installation guide. DO NOT PLUG INTO POWER YET.
Now you need to mount your Driver and Controller using the screws provided, close enough to your power source so your cord will reach. These are IP67 Rated, so it is fine for them to get wet, just ensure the Driver and Controller are off the ground and not submerged in water.
IMPORTANT NOTE: You need to also ensure that the remote control receiver (the small cord on the Controller) is IN DIRECT LINE OF SIGHT to the remote control. The remote control has a range of 3-5 metres but will not operate the lights if there is no line of sight between it and the receiver.
You are now ready to plug in the Driver and switch on the power socket. You can now remove the plastic insert in the battery compartment of the remote control and select the mode/colour that you desire. Enjoy!
Head across to the right of this page to check out extra cabling and extra light heads to suit your lighting design!